Show Bgp - Cisco Nexus 3548 Command Reference Manual

show bgp

show bgp
To display Border Gateway Protocol (BGP) routes, use the show bgp command.
Syntax Description
all
ipv4
unicast
multicast
addr
prefix
longer-prefixes (Optional) Displays the prefix and any more specific routes.
vrf vrf-name
all
Command Default
None
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines Use the show bgp command to display information about BGP.
This command requires the LAN Enterprise Services license.
Examples This example shows how to display an entry in the BGP table:
switch# show bgp ipv4 multicast
Related Commands Command
clear bgp
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
408
show bgp {all | ipv4 {unicast | multicast} [addr | prefix [longer-prefixes]] [vrf vrf-name | all]}
Displays BGP information for all address families.
Displays BGP information for the IPv4 address family.
Displays BGP information for the unicast address family.
Displays BGP information for the multicast address family.
(Optional) Network from the selected address family. The format is A.B.C.D for
IPv4.
(Optional) Prefix from the selected address family. The format is A.B.C.D/length for
IPv4.
(Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
(Optional) Specifies all VRF.
Modification
This command was introduced.
Description
Clears entries in the BGP table.
Chapter Unicast Routing Show Commands
OL-27852-01