Show Routing - Cisco Nexus 3548 Command Reference Manual

Chapter Unicast Routing Show Commands

show routing

To display routing information, use the show routing command.
Syntax Description ip
ipv4
address
hostname
prefix
route-type
clients
hidden-nh
interface type
number
next-hop addr
recursive-next
-hop addr
vrf vrf-instance (Optional) Specifies the virtual router context (VRF) instance. The VRF can be one
Command Default None
Command Modes
Any command mode
Command History Release
5.0(3)A1(1)
Examples This example shows how to display the route table:
OL-27852-01
show routing [ip | ipv4] [address | hostname | prefix | route-type | clients | hidden-nh interface type
number | next-hop addr | recursive-next-hop [addr]] [vrf vrf-instance]
Specifies the IP address.
Specifies the IPv4 address.
(Optional) IPv4 address. IPv4 address format is x.x.x.x.
Hostname. The name can be any case-sensitive, alphanumeric string up to 80
characters.
(Optional) IPv4 prefix. IPv4 prefix format is x.x.x.x/length.
(Optional) Type of route. Use ? to see the list of types.
(Optional) Displays the routing clients.
(Optional) Displays hidden next-hop information.
(Optional) Displays the routes for an interface. The interface can be one of the
following:
• mgmt—Management interface. The default management interface is 0.
• vlan—VLAN interface. The VLAN interface number is from 1 to 4094.
(Optional) Displays routes with this next-hop address. The format is x.x.x.x.
(Optional) Displays routes with this recursive next-hop address. The format is
x.x.x.x.
of the following:
vrf-name—VRF name. The name can be any case-sensitive, alphanumeric string
•
up to 32 characters.
all—Specifies all VRFs.
•
default—Specifies the default VRF.
•
management—Specifies the management VRF.
•
Modification
This command was introduced.
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
show routing
509