Show Ip Ospf Traffic - Cisco Nexus 3548 Command Reference Manual

show ip ospf traffic

show ip ospf traffic
To display Open Shortest Path First (OSPF) traffic statistics, use the show ip ospf traffic command.
Syntax Description instance-tag
ethernet slot/port
loopback if_number
port-channel number (Optional) Specifies the EtherChannel interface and EtherChannel number.
vrf vrf-name
Command Default None
Command Modes Any command mode
Command History Release
5.0(3)A1(1)
Usage Guidelines Use the show ip ospf traffic command to display traffic statistics for one or more OSPF instances.
This command requires the LAN Enterprise Services license.
Examples This example shows how to display OSPF traffic statistics for interface 1/5:
switch# show ip ospf traffic ethernet 1/5
Related Commands Command
clear ip ospf traffic
show running-config
ospf
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
494
show ip ospf [instance-tag] traffic [ethernet slot/port | loopback if_number | port-channel
number] [vrf vrf-name]
(Optional) Name of the OSPF instance. The name can be a maximum of 20
alphanumeric characters.
(Optional) Specifies the Ethernet interface and the slot number and port
number. The slot number is from 1 to 255, and the port number is from 1 to
128.
(Optional) Specifies the loopback interface. The loopback interface number is
from 0 to 1023.
The range is from 1 to 4096.
(Optional) Specifies the name of the virtual routing and forwarding (VRF)
instance. The vrf-name argument can be specified as any case-sensitive,
alphanumeric string up to 32 characters. The strings "default",
"management", and "all" are reserved VRF names.
Modification
This command was introduced.
Description
Clears OSPF traffic statistics.
Displays the OSPF running configuration information.
Chapter Unicast Routing Show Commands
OL-27852-01