Cisco Nexus 3548 Command Reference Manual page 258

match ip next-hop prefix-list
Examples This example shows how to distributes routes that have a next-hop router address passed by the prefix
list test:
switch# configure terminal
switch(config)# route-map blue
switch(config-route-map)# match ip next-hop prefix-list test
switch(config-route-map)#
Related Commands Command
match as-path
match community
match ip address
match ip route-source
match route-type
match tag
route-map
set as-path
set automatic-tag
set community
set level
set local-preference
set metric (BGP, OSPF, RIP)
set metric-type
set next-hop
set tag
set weight
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
238
Description
Matches a BGP autonomous system path access list.
Matches a BGP community.
Distributes any routes that have a destination network number
address that is permitted by a standard or expanded access list.
Redistributes routes that have been advertised by routers and access
servers at the address specified by the access lists.
Redistributes routes of the specified type.
Redistributes routes in the routing table that match the specified
tags.
Defines the conditions for redistributing routes from one routing
protocol into another.
Modifies an autonomous system path for BGP routes.
Automatically computes the tag value.
Sets the BGP communities attribute.
Indicates where to import routes.
Specifies a preference value for the autonomous system path.
Sets the metric value for a routing protocol.
Sets the metric type for the destination routing protocol.
Specifies the address of the next hop.
Sets a tag value of the destination routing protocol.
Specifies the BGP weight for the routing table.
Chapter Unicast Routing Commands
OL-27852-01