Suzuki Ignis Service Manual page 1691

6-3-32 ENGINE GENERAL INFORMATION AND DIAGNOSIS (Z13DT ENGINE)
B-10, Complaint: Engine Start
Customer complaint
Engine does not start, starter
slow/does not turn
Engine does not start, starter
runs normal
Engine starts poorly, starter
runs normal
Remedy
Perform the following test step:
• Refer to Table C-46, Starter Circuit
The following tests must be performed in the given order:
• Refer to Table B-02, Data List
• Refer to Table B-21, Fuel System
• Refer to Table B-02, Data List "T18" Desired Rail Pressure
• Refer to Table B-02, Data List "T19" Fuel Rail Pressure
• Refer to Table B-02, Data List "T20" Rail Pressure Regulator
• Refer to Table B-02, Data List "T21" Fuel Quantity
• Refer to Table B-02, Data List "T22" SOI
• Refer to Table B-02, Data List "T09" Engine Speed
The check of the following system is only necessary, if the outside temperature
is less than 0 °C (32 °F).
• Refer to Table B-04 Actuator Test "T03" Glow Plug Control Test
• Refer to Table C-35, Filterheating Circuit
The following tests must be performed in the given order:
• Refer to Table B-02 Data List "T01" Battery Voltage
• Refer to Table B-21, Fuel System
• Refer to Table B-22, Intake-Air System
• Refer to Table B-02 Data List "T14" Barometric Pressure/Barometric Sensor
Voltage
• Refer to Table B-02 Data List "T10" Coolant Temperature
• Refer to Table B-02 Data List "T11" Fuel Temperature
• Refer to Table B-02 Data List "T12" Intake Air Temperature
• Refer to Table B-02 Data List "T18" Desired Rail Pressure
• Refer to Table B-02 Data List "T19" Fuel Rail Pressure
• Refer to Table B-02 Data List "T20" Rail Pressure Regulator
• Refer to Table B-02 Data List "T21" Fuel Quantity
• Refer to Table B-02 Data List "T22" SOI
• Refer to Table B-02 Data List "T09" Engine Speed
The check of the following system is only necessary, if the outside temperature
is less than 0 °C (32 °F).
• Refer to Table B-04 Actuator Test "T03" Glow Plug Control Test
• Refer to Table C-35, Filterheating Circuit