Suzuki Ignis Service Manual page 1682

B-04, Actuator Test
Test Work Order Description
T01 Tester Display – Fuel Pump Relay Test
• Ignition ON
• Engine OFF
• Press corresponding key in the system main menu to select Out-
put Tests under Misc Test, select the desired test and confirm with
ENTER. Follow the instructions in the scan tool display.
• After the test is started, the corresponding component can be actu-
ated using the YES/NO keys.
• Press NO key OFF
• Press YES key ON
Concerned Terminals:
E27-75 (For RM413D)
G88-75 (For RB413D)
Yes: T02
T02 Tester Display – EGR Solenoid Test
• Ignition ON
• Engine OFF
• Press corresponding key in the system main menu to select Out-
put Tests under Misc Test, select the desired test and confirm with
ENTER. Follow the instructions in the scan tool display.
• After the test is started, the corresponding component can be actu-
ated using the YES/NO keys.
• Press NO key OFF
• Press YES key ON
Concerned Terminals:
C66-5, C66-15 (For RM413D)
D26-5, D26-15 (For RB413D)
Yes: T03
ENGINE GENERAL INFORMATION AND DIAGNOSIS (Z13DT ENGINE) 6-3-23
Nominal Value
The fuel pump is not run-
ning
Noise check:
Clicking noise from the
relay
and
Is the fuel pump running?
No: C-06
Noise check:
Clicking noise from the
actuator
No: C-28