Suzuki Ignis Service Manual page 1688

B-07, ECU Control
Test Work Order Description
T01 Tester Display – RPM Control
• Engine idling
• Press corresponding key in the system main menu to select Out-
put Tests under Misc Test, select the desired test and confirm with
ENTER. Follow the instructions in the scan tool display.
Engine Speed (RPM) Control
• After the test is started, the corresponding component can be actu-
ated using the YES/NO keys.
• The YES/NO keys can be used to change engine speed in the
range from approximately 800 rpm to 3000 rpm.
Concerned Terminals:
–
Yes: –
ENGINE GENERAL INFORMATION AND DIAGNOSIS (Z13DT ENGINE) 6-3-29
Nominal Value
Engine Speed between
800 rpm and 3000 rpm
No: C-02