Table of Contents
Advertisement
8G3-20 IMMOBILIZER CONTROL SYSTEM (Z13DT ENGINE MODEL)
DTC B3060 Incorrect Transponder Detected
DTC Detecting Condition and Trouble Area
DTC Detecting Condition
• FIX CODE (FC) does not match with registered one.
• FC is not registered in Immobilizer Control Module.
Troubleshooting
Step
1
Is DTC B3056 also output?
2
Check DATA LIST "TRANSPONDER FC".
Is it registered?
3
Register transponder according to "How to reg-
ister ignition key" in this section.
Check SUZUKI scan tool DATA LIST for "FIX
CODE".
Is it registered?
Action
Trouble Area
• Ignition key with built-in transponder
• Immobilizer Control Module
Yes
Proceed to DTC FLOW
TABLE of DTC B3056.
Then, go to Step 2.
Replace ignition key with
built-in transponder.
Then go to Step 3.
Transponder FIX CODE
is registered.
No
Go to Step 2.
Go to Step 3.
Transponder registration
procedure is not com-
pleted correctly.
Register ignition key
again.
Advertisement
Table of Contents
