Suzuki Ignis Service Manual page 1515

7B-110 AUTOMATIC TRANSAXLE
2
"A"
"B"
"D"
1
"C"
A/T Relay
Inspection
1) Disconnect negative cable at battery.
2) Remove A/T relay (2) from fuse and relay box (1).
3) Check that there is no continuity between terminal "C" and
"D".
If continuity is indicated, replace A/T relay.
4) Connect battery positive (+) terminal to terminal "A" of A/T
relay and battery negative (–) terminal to terminal "B" of A/T
relay.
Check continuity between terminal "C" and "D" of A/T relay.
If continuity does not indicated, replace A/T relay.