Table of Contents
Advertisement
64) Turn over transaxle and uncaulk reduction drive gear nut (1).
65) Secure reduction drive gear (1) with parking lock pawl, then
remove reduction drive gear nut.
CAUTION:
• It is recommended that this operation should be car-
ried out on rubber mat to prevent damaging transaxle
case.
• Never reuse removed nut.
66) Using special tools and hydraulic press, remove planetary
ring gear subassembly (1).
Special tool
(A): 09913-84510
(B): 09923-78210
CAUTION:
Do not reuse planetary ring gear subassembly. Other-
wise it may cause damage to planetary gear unit and/or
reduction gears.
67) Remove parking lock pawl shaft, then spring (2) and parking
lock pawl (1).
AUTOMATIC TRANSAXLE 7B-137
Advertisement
Table of Contents
