Storm Control; Global Setting - Planet Networking & Communication LRP-822CS User Manual

4.9.12 Storm Control

Storm control for the switch is configure
There is an unknown uni cast storm rate
These only affect flooded fram
4.9.12.1

Global Setting

The Storm C ontrol Global Setting and
The page includes the following fields:
Object
 Unit
 Preamble & IFG
Buttons
: Click to apply changes.
T he page includes the following fields:
Object
 Unit
 Preamble & IFG
d on this page .
control, unknown multicast storm ra
es, i.e. fr ames with a (VLAN ID, DMAC) pair not pres
Information screens in
Figure 4-9-69 Storm Control Global Setting Page Screenshot
Description
Controls the unit of measure for the storm control rate as "pps" or "bps". The
default value is "bps".
Set the excluded or included interframe gap
-9-70 Storm Control Global Information Pag
Figure 4
Description
Display the current unit
Display the current preamble & IFG
User's Manual of LRP-822CS/LRP-1622CS
te control, and a broadcast storm rate control.
ent on the MAC Address table.
Figure 4-9-69 & Figure 4-9-70
e Screenshot
274
appear.