Storm Control - Planet Networking & Communication WGSW-24010 User Manual

10/100/1000mbps 24-port +1 mini-gbic
Hide thumbs Also See for WGSW-24010:
Table of Contents

Advertisement

The page includes the following fields:
• LAG -- The LAG number.
• Description (0-64 Characters) -- Provides a user-defined description of the configured LAG.
• LAG Type -- The port types that comprise the LAG.
• Admin Status -- Enables or disables traffic forwarding through the selected LAG.
• Current LAG Status -- Indicates if the LAG is currently operating.
• Re-Activate Suspended LAG -- Reactivates a suspended LAG.
• Operational Status -- Operational status of the LAG.
• Admin Auto Negotiation -- Enables or disables Auto Negotiation on the LAG. Auto-negotiation is a protocol
between two link partners that enables a LAG to advertise its transmission rate, duplex mode and flow control
(the flow control default is disabled) abilities to its partner.
• Current Auto Negotiation -- The currently configured Auto Negotiation setting.
• Admin Speed -- The speed at which the LAG is operating.
• Current LAG Speed -- The currently configured speed at which the LAG is operating.
• Admin Back Pressure -- Enables or disables Back Pressure mode on the LAG. Back Pressure mode is
effective on the ports operating in Half Duplex in the LAG.
• Current Back Pressure -- The currently configured Back Pressure setting.
• Admin Flow Control -- Enables/disables flow control, or enables the auto negotiation of flow control on the
LAG. Flow Control mode is effective on the ports operating in Full Duplex in the LAG.
• Current Flow Control -- The user-designated flow control setting.

Storm Control

A BroadcastStorm is a result of an excessive amount of broadcast messages simultaneously transmitted across a network
by a single port. Forwarded message responses are heaped onto the network, straining network resources or causing the
network to time out.
The system measures the incoming Broadcast and Multicast frame rate separately on each port, and discard frames when
the rate exceeds a user-defined rate.
Figure 3-52 LAG Configure screen
58

Advertisement

Table of Contents
loading

Table of Contents