Table of Contents
Advertisement
• Port Shaper Enable
• Port Shaper Rate
•
Port Shaper Unit
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the previous page.
4.5.3 Storm Control
4.5.3.1 Storm Policing
Global storm policers for the switch are configured on this page.
There is a unicast storm policer, multicast storm policer, and a broadcast storm policer.
These only affect flooded frames, i.e. frames with a (VLAN ID, DMAC) pair not present in the MAC Address table.
The displayed settings are:
The page includes the following fields:
Object
• Frame Type
• Enable
User's Manual of GS-6320 and MGS-6320 Managed Switches
Controls whether the port shaper is enabled for this switch port.
Controls the rate for the port shaper.
This value is restricted to 100-1000000 when the "Unit" is "kbps", and it is
restricted to 1-13200 when the "Unit" is "Mbps".
The default value is 500.
Controls the unit of measure for the port shaper rate as "kbps" or "Mbps".
The default value is "kbps".
Description
The frame type for which the configuration below applies.
Enable or disable the global storm policer for the given frame type.
324
Advertisement
Table of Contents
