Figure 3-14 Configuring The Telnet Interface - SMC Networks SMC TigerStack III SMC6824M Management Manual

C
ONFIGURING THE
Web – Click System, Line, Telnet. Specify the connection parameters for
Telnet access, then click Apply.
CLI – Enter Line Configuration mode for a virtual terminal, then specify
the connection parameters as required. To display the current virtual
terminal settings, use the show line command from the Normal Exec
level.
Console(config)#line vty
Console(config-line)#login local
Console(config-line)#password 0 secret
Console(config-line)#timeout login response 300
Console(config-line)#exec-timeout 0
Console(config-line)#password-thresh 3
Console(config-line)#end
Console#show line
Console configuration:
Password threshold:
Interactive timeout: Disabled
Login timeout: Disabled
Silent time:
Baudrate:
Databits:
Parity:
Stopbits:
VTY configuration:
Password threshold:
Interactive timeout: 600 sec
Login timeout: 300 sec
Console#
3-34
S
WITCH

Figure 3-14 Configuring the Telnet Interface

5 times
60
auto
8
none
1
3 times
4-14
4-15
4-16
4-17
4-18
4-19
4-24