I
C
NITIAL
ONFIGURATION
The switch's CLI configuration program, web interface, and SNMP agent
allow you to perform the following management functions:
•
Set user names and passwords
•
Set an IP interface for the management VLAN
•
Configure SNMP parameters
•
Enable/disable any port
•
Set the speed/duplex mode for any port
•
Configure the bandwidth of any port by limiting input or output rates
•
Power attached devices using IEEE 802.3af Power over Ethernet
(PoE)
•
Control port access through IEEE 802.1X security or static address
filtering
•
Filter packets using Access Control Lists (ACLs)
•
Configure up to 255 IEEE 802.1Q VLANs
•
Enable GVRP automatic VLAN registration
•
Configure IGMP multicast filtering
•
Upload and download system firmware via TFTP
•
Upload and download switch configuration files via TFTP
•
Configure Spanning Tree parameters
•
Configure Class of Service (CoS) priority queuing
•
Configure up to 6 static or LACP trunks
•
Enable port mirroring
•
Set broadcast storm control on any port
•
Display system information and statistics
•
Configure any stack unit through the same IP address
1. SMC6824MPE and SMC6826MPE only
2-2
1