Show Queue Cos-Map; Priority Commands (Layer 3 And 4); Table 4-66 Priority Commands (Layer 3 And 4) - SMC Networks SMC TigerStack III SMC6824M Management Manual

P C
RIORITY OMMANDS

show queue cos-map

This command shows the class of service priority map.
Syntax
show queue cos-map [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-26)
• port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
Traffic Class : 0 1 2 3 4 5 6 7
Priority Queue: 1 0 0 1 2 2 3 3
Console#

Priority Commands (Layer 3 and 4)

Command
map ip port
map ip port
map ip precedence
map ip precedence
map ip dscp
map ip dscp
map access-list ip
4-260

Table 4-66 Priority Commands (Layer 3 and 4)

Function
Enables TCP/UDP class of service mapping GC
Maps TCP/UDP socket to a class of service IC
Enables IP precedence class of service
mapping
Maps IP precedence value to a class of
service
Enables IP DSCP class of service mapping
Maps IP DSCP value to a class of service
Sets the CoS value and corresponding output
queue for packets matching an ACL rule
Mode Page
4-261
4-262
GC 4-262
IC 4-263
GC 4-264
IC 4-265
IC 4-135