Basic Configuration; Displaying System Information - SMC Networks SMC TigerStack III SMC6824M Management Manual

Basic Configuration

Displaying System Information

You can easily identify the system by providing a descriptive name,
location and contact information.
Field Attributes
• System Name – Name assigned to the switch system.
• Object ID – MIB II object ID for switch's network management
subsystem. (SMC6824M: 1.3.6.1.4.1.202.20.28;
SMC6824MPE: 1.3.6.1.4.1.202.20.41;
SMC6826MPE: 1.3.6.1.4.1.202.20.53)
• Location – Specifies the system location.
• Contact – Administrator responsible for the system.
• System Up Time – Length of time the management agent has been up.
These additional parameters are displayed for the CLI.
• MAC Address – The physical layer address for this switch.
• Web server – Shows if management access via HTTP is enabled.
• Web server port – Shows the TCP port number used by the web
interface.
• Web secure server – Shows if management access via HTTPS is
enabled.
• Web secure server port – Shows the TCP port used by the HTTPS
interface.
• Telnet server – Shows if management access via Telnet is enabled.
• Telnet server port – Shows the TCP port number used by Telnet.
• Authentication login – Defines the login authentication method and
precedence.
• Authentication enable – Defines the authentication method and
precedence to use when changing from Exec command mode to
Privileged Exec command mode
• POST result – Shows results of the power-on self-test.
B C
ASIC ONFIGURATION
3-13