Figure 3-94 Mapping Ip Dscp Priority To Class Of Service Values - SMC Networks SMC TigerStack III SMC6824M Management Manual

C
ONFIGURING THE
Command Attributes
• DSCP Priority Table – Shows the DSCP Priority to CoS map.
• Class of Service Value – Maps a CoS value to the selected DSCP
Priority value. Note that "0" represents low priority and "7" represent
high priority.
Note: IP DSCP settings apply to all interfaces.
21
Web – Click Priority, IP DSCP Priority. Select a port or trunk from the
Interface field. Select an entry from the DSCP table, enter a value in the
Class of Service Value field, then click Apply.

Figure 3-94 Mapping IP DSCP Priority to Class of Service Values

21. Mapping specific values for DSCP Priority is implemented as an interface configuration command, but
any changes will apply to the all interfaces on the switch.
3-212
S
WITCH