Figure 3-87 Configuring Private Vlan Ports - SMC Networks SMC TigerStack III SMC6824M Management Manual

promiscuous ports. If PVLAN Port Type is "Host," then specify the
associated secondary VLAN.
Web – Click Private VLAN, Private VLAN Port Configuration or Private
VLAN Trunk Configuration. Set the PVLAN Port Type for each port that
will join a private VLAN. For promiscuous ports, set the associated
primary VLAN. For host ports, set the associated secondary VLAN. After
all the ports have been configured, click Apply.

Figure 3-87 Configuring Private VLAN Ports

CLI – This example shows the switch configured with primary VLAN 5
and secondary VLAN 6. Port 3 has been configured as a promiscuous port
and mapped to VLAN 5, while ports 4 and 5 have been configured as a
host ports and associated with VLAN 6. This means that traffic for port 4
and 5 can only pass through port 3.
Console(config)#interface ethernet 1/3
Console(config-if)#switchport mode private-vlan promiscuous
Console(config-if)#switchport private-vlan mapping 5
Console(config-if)#exit
Console(config)#interface ethernet 1/4
Console(config-if)#switchport mode private-vlan host
Console(config-if)#switchport private-vlan host-association 6 4-246
Console(config-if)#exit
Console(config)#interface ethernet 1/5
Console(config-if)#switchport mode private-vlan host
Console(config-if)#switchport private-vlan host-association 6
Console(config-if)#
VLAN C
ONFIGURATION
4-245
4-246
4-245
3-201