Show Ip Access-Group; Map Access-List Ip - SMC Networks SMC TigerStack III SMC6824M Management Manual

Related Commands
show ip access-list (4-128)

show ip access-group

This command shows the ports assigned to IP ACLs.
Command Mode
Privileged Exec
Example
Console#show ip access-group
Interface ethernet 1/2
IP standard access-list david
Console#
Related Commands
ip access-group (4-134)

map access-list ip

This command sets the output queue for packets matching an ACL rule. The
specified CoS value is only used to map the matching packet to an output
queue; it is not written to the packet itself. Use the no form to remove the
CoS mapping.
Syntax
[no] map access-list ip acl_name cos cos-value
• acl_name – Name of the ACL. (Maximum length: 15 characters)
• cos-value – CoS value. (Range: 0-7)
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
• You must configure an ACL mask before you can map CoS values to the
rule.
C L
OMMAND INE
I
NTERFACE
4-135