Resetting The System; Figure 3-19 Resetting The Switch - SMC Networks SMC TigerStack III SMC6824M Management Manual

C
ONFIGURING THE
CLI – Enter the IP address of at least one SMTP server, set the syslog
severity level to trigger an email message, and specify the switch (source)
and up to five recipient (destination) email addresses. Enable SMTP with
the logging sendmail command to complete the configuration. Use the
show logging sendmail command to display the current SMTP
configuration.
Console(config)#logging sendmail host 192.168.1.4
Console(config)#logging sendmail level 3
Console(config)#logging sendmail source-email
big-wheels@matel.com
Console(config)#logging sendmail destination-email
chris@this-company.com
Console(config)#logging sendmail
Console(config)#exit
Console#show logging sendmail
SMTP servers
-----------------------------------------------
1. 192.168.1.4
SMTP minimum severity level: 4
SMTP destination email addresses
-----------------------------------------------
1. chris@matel.com
SMTP source email address:
SMTP status:
Console#

Resetting the System

Web – Select System, Reset to reboot the switch. When prompted,
confirm that you want reset the switch.
3-42
S
WITCH

Figure 3-19 Resetting the Switch

big-wheels@matel.com
Enabled
4-64
4-65
4-66
4-67
4-67
4-68