Port Security; Table 4-33 Port Security Commands - SMC Networks SMC TigerStack III SMC6824M Management Manual

A
UTHENTICATION
Command

port security

mac-address-table static Maps a static address to a port in a VLAN GC
show mac-address-table Displays entries in the bridge-forwarding
port security
This command enables or configures port security. Use the no form without
any keywords to disable port security. Use the no form with the appropriate
keyword to restore the default settings for a response to security violation or
for the maximum number of allowed addresses.
Syntax
port security [action {shutdown | trap | trap-and-shutdown}
| max-mac-count address-count]
no port security [action | max-mac-count]
• action - Response to take when port security is violated.
- shutdown - Disable port only.
- trap - Issue SNMP trap message only.
- trap-and-shutdown - Issue SNMP trap message and disable port.
• max-mac-count
address-count - The maximum number of MAC addresses that can be
learned on a port. (Range: 0 - 1024, where 0 means disabled)
Default Setting
• Status: Disabled
• Action: None
• Maximum Addresses: 0
Command Mode
Interface Configuration (Ethernet)
4-108
C
OMMANDS

Table 4-33 Port Security Commands

Function
Configures a secure port
database
Mode Page
IC 4-108
4-201
PE 4-202