SMC Networks SMC TigerStack III SMC6824M Management Manual page 433

[no] {permit | deny} untagged-eth2
{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
[ethertype protocol [protocol-bitmask]]
[no] {permit | deny} tagged-802.3
{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
[vid vid vid-bitmask]
[no] {permit | deny} untagged-802.3
{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
• tagged-eth2 – Tagged Ethernet II packets.
• untagged-eth2 – Untagged Ethernet II packets.
• tagged-802.3 – Tagged Ethernet 802.3 packets.
• untagged-802.3 – Untagged Ethernet 802.3 packets.
• any – Any MAC source or destination address.
• host – A specific MAC address.
• source – Source MAC address.
• destination – Destination MAC address range with bitmask.
• address-bitmask
• vid – VLAN ID. (Range: 1-4093)
• vid-bitmask
• protocol – A specific Ethernet protocol number. (Range: 600-fff hex.)
• protocol-bitmask
Default Setting
None
Command Mode
MAC ACL
Command Usage
• New rules are added to the end of the list.
• The ethertype option can only be used to filter Ethernet II formatted
packets.
26. For all bitmasks, "1" means care and "0" means ignore.
26
– Bitmask for MAC address (in hexadecimal format).
– VLAN bitmask. (Range: 1-4093)
26
– Protocol bitmask. (Range: 600-fff hex.)
26
C L
OMMAND INE
I
NTERFACE
4-141