Spanning-Tree - SMC Networks SMC TigerStack III SMC6824M Management Manual

S T
PANNING REE
Command
spanning-tree edge-port Enables fast forwarding for edge ports
spanning-tree portfast
spanning-tree link-type Configures the link type for RSTP/MSTP
spanning-tree mst cost Configures the path cost of an instance in
spanning-tree mst
port-priority

spanning-tree

protocol-migration
show spanning-tree
show spanning-tree mst
configuration
spanning-tree
This command enables the Spanning Tree Algorithm globally for the switch.
Use the no form to disable it.
Syntax
[no] spanning-tree
Default Setting
Spanning tree is enabled.
Command Mode
Global Configuration
Command Usage
The Spanning Tree Algorithm (STA) can be used to detect and disable
network loops, and to provide backup links between switches, bridges or
routers. This allows the switch to interact with other bridging devices
(that is, an STA-compliant switch, bridge or router) in your network to
4-206
C
OMMANDS
Table 4-56 Spanning Tree Commands
Function
Sets an interface to fast forwarding
the MST
Configures the priority of an instance in the
MST
Re-checks the appropriate BPDU format
Shows spanning tree configuration for the
common spanning tree (i.e., overall bridge),
a selected interface, or an instance within
the multiple spanning tree
Shows the multiple spanning tree
configuration
(Continued)
Mode Page
IC
IC
IC
IC
IC
PE
PE
PE
4-221
4-222
4-223
4-224
4-225
4-226
4-227
4-229