Ip Access-Group - SMC Networks SMC TigerStack III SMC6824M Management Manual

A C
CCESS ONTROL
Example
Console#show access-list ip mask-precedence
IP ingress mask ACL:
mask host any
mask 255.255.255.0 any
Console#
Related Commands
mask (IP ACL) (4-130)

ip access-group

This command binds a port to an IP ACL. Use the no form to remove the
port.
Syntax
[no] ip access-group acl_name {in | out}
• acl_name – Name of the ACL. (Maximum length: 15 characters)
• in – Indicates that this list applies to ingress packets.
• out – Indicates that this list applies to egress packets.
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
• A port can only be bound to one ACL.
• If a port is already bound to an ACL and you bind it to a different ACL,
the switch will replace the old binding with the new one.
• You must configure a mask for an ACL rule before you can bind it to a
port.
Example
Console(config)#int eth 1/2
Console(config-if)#ip access-group standard david in
Console(config-if)#
4-134
L C
IST OMMANDS