Web – Click Security, IP Filter. Enter the IP addresses or range of
addresses that are allowed management access to an interface, and click
Add IP Filtering Entry.
Figure 3-41 Entering IP Addresses to be Filtered
CLI – This example restricts management access for Telnet and SNMP
clients.
Console(config)#management telnet-client 192.168.1.19
Console(config)#management telnet-client 192.168.1.25 192.168.1.30
Console(config)#end
Console#show management all-client
Management IP Filter
HTTP-Client:
Start IP address
-----------------------------------------------
SNMP-Client:
Start IP address
-----------------------------------------------
TELNET-Client:
Start IP address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Console#
End IP address
End IP address
End IP address
192.168.1.19
192.168.1.30
U
A
SER
UTHENTICATION
4-37
4-38
3-97