SMC Networks SMC TigerStack III SMC6824M Management Manual page 497

Table 4-56 Spanning Tree Commands
Command
spanning-tree
hello-time
spanning-tree max-age Configures the spanning tree bridge
spanning-tree default
priority
spanning-tree priority
spanning-tree
pathcost method
spanning-tree
transmission-limit
spanning-tree
backup-root
spanning-tree
mst-configuration
mst vlan
mst priority
name
revision
max-hops
spanning-tree
spanning-disabled
spanning-tree cost
spanning-tree
port-priority
Function
Configures the spanning tree bridge hello
time
maximum age
Sets the spanning-tree priority to use
increments specified by IEEE 802.1D
(steps of 1) or 802.1t (steps of 4096)
Configures the spanning tree bridge priority GC
Configures the path cost method for
RSTP/MSTP
Configures the transmission limit for
RSTP/MSTP
Adjusts the bridge priority in an attempt to
take over as the root bridge if it loses
contact with the original root device
Changes to MSTP configuration mode
Adds VLANs to a spanning tree instance
Configures the priority of a spanning tree
instance
Configures the name for the multiple
spanning tree
Configures the revision number for the
multiple spanning tree
Configures the maximum number of hops
allowed in the region before a BPDU is
discarded
Disables spanning tree for an interface
Configures the spanning tree path cost of
an interface
Configures the spanning tree priority of an
interface
C L
OMMAND INE
(Continued)
I
NTERFACE
Mode Page
GC 4-209
GC 4-210
GC 4-211
4-211
GC 4-212
GC 4-213
GC 4-214
GC 4-214
MST 4-215
MST 4-216
MST 4-217
MST 4-218
MST 4-218
IC 4-214
IC 4-220
IC 4-221
4-205