Spanning-Tree Pathcost Method - SMC Networks SMC TigerStack III SMC6824M Management Manual

S T
PANNING REE
Default Setting
32768
Command Mode
Global Configuration
Command Usage
Bridge priority is used in selecting the root device, root port, and
designated port. The device with the highest priority (i.e., lower numeric
value) becomes the STA root device. However, if all devices have the
same priority, the device with the lowest MAC address will then become
the root device.
Example
Console(config)#spanning-tree priority 40000
Console(config)#

spanning-tree pathcost method

This command configures the path cost method used for Rapid Spanning
Tree and Multiple Spanning Tree. Use the no form to restore the default.
Syntax
spanning-tree pathcost method {long | short}
no spanning-tree pathcost method
• long - Specifies 32-bit based values that range from 1-200,000,000.
• short - Specifies 16-bit based values that range from 1-65535.
Default Setting
Long method
Command Mode
Global Configuration
4-212
C
OMMANDS