SMC Networks SMC TigerStack III SMC6824M Management Manual page 409

Command Mode
Privileged Exec
Command Usage
This command displays the following information:
• Global 802.1X Parameters – Shows whether or not 802.1X port
authentication is globally enabled on the switch.
• 802.1X Port Summary – Displays the port access control parameters for
each interface that has enabled 802.1X, including the following items:
- Status – Administrative state for port access control.
- Operation Mode–Allows single or multiple hosts (page 4-113).
- Mode – Dot1x port control mode (page 4-112).
- Authorized – Authorization status (yes or n/a - not authorized).
• 802.1X Port Details – Displays the port access control parameters for
each interface, including the following items:
- reauth-enabled– Periodic re-authentication (page 4-114).
- reauth-period– Time after which a connected client must be
re-authenticated (page 4-115).
- quiet-period– Time a port waits after Max Request Count is exceeded
before attempting to acquire a new client (page 4-115).
- tx-period– Time a port waits during authentication session before
re-transmitting EAP packet (page 4-116).
- supplicant-timeout– Supplicant timeout.
- server-timeout– Server timeout.
- reauth-max– Maximum number of reauthentication attempts.
- max-req– Maximum number of times a port will retransmit an EAP
request/identity packet to the client before it times out the
authentication session (page 4-111).
- Status– Authorization status (authorized or not).
- Operation Mode– Shows if single or multiple hosts (clients) can
connect to an 802.1X-authorized port.
- Max Count– The maximum number of hosts allowed to access this
port (page 4-113).
- Port-control–Shows the dot1x mode on a port as auto,
force-authorized, or force-unauthorized (page 4-112).
C L
OMMAND INE
I
NTERFACE
4-117