Management Guide
TigerAccess™ EE
3.1.3
3.1.4
SMC7824M/VSW
Global Configuration Mode
In Global Configuration mode, you can configure general functions of the system. You can
also open another configuration mode from this mode.
To open Global Configuration mode, enter the configure terminal command, and then
the system prompt will be changed from SWITCH# to SWITCH(config)#.
Command
configure terminal
Tab. 3.3
shows main commands of Global Configuration mode.
Command
bridge
dns
dot1x
exec-timeout
help
hostname
interface
mvr
ntp
passwd
qos
rmon-alarm
snmp
ssh
stack
syslog
threshold
Tab. 3.3
Main Command of Global Configuration Mode
Bridge Configuration Mode
In Bridge Configuration mode, you can configure various Layer 2 functions such as VLAN,
STP, LACP, EFM OAM, etc.
To open Bridge Configuration mode, enter the bridge command, then the system prompt
will be changed from SWITCH(config)# to SWITCH(bridge)#.
Command
bridge
Mode
Enable
Opens Global Configuration mode.
Opens Bridge Configuration mode.
Sets a DNS server.
Configures 802.1X authentication.
Sets an auto log-out timer.
Shows a description of the interactive help system.
Sets a host name of the system.
Opens Interface Configuration mode to configure a specified interface.
Configures MVR.
Configures NTP.
Sets a system password.
Configures QoS.
Opens RMON Configuration mode to configure RMON alarm.
Configures SNMP.
Configures SSH.
Configures a system stacking.
Configures a syslog.
Sets a system threshold.
Mode
Global
Opens Bridge Configuration mode.
Description
Description
Description
CLI
27