Table of Contents
Advertisement
LPOD-R Outdoor Amplifier / Block Up Converter
MN-LPODR
Ethernet Interface Operation
Revision 3
To see the full response messages, you can use the HyperTerminal terminal
emulation program configured as a Telnet client. An example of the login process
and remote control operation, when using HyperTerminal as the interface, is
shown here:
Figure 4-2. Telnet Interface Example – HyperTerminal
4.3.1.1 Configure HyperTerminal for Telnet Remote Control
Operation
Figure 4-3. Configure HyperTerminal
See Figure 4-3. Do these steps:
4–5
Advertisement
Table of Contents
