Status | Events - Comtech EF Data LPOD-R PS .5 Installation And Operation Manual

LPOD-R Outdoor Amplifier / Block Up Converter
Ethernet Interface Operation

4.5.4.4 Status | Events

Use this page to see stored events data. Additionally, use it to set the
parameters for how the LPOD-R triggers events and alarms. Refresh the page to
see the latest data.
Figure 4-14. Status | Events Page
Unread Stored Events
This window shows the unread stored events log in sequential, date-stamped
format. The unit shows the five oldest stored events in the alarm log. A running
tally of the number of unread stored events shows in the window header. All
events that are read from the log are removed from the log automatically.
• Select Read Next Five Events to show the next five unread stored events
in the log.
• Select Clear Events Log to clear all stored events from the log.
• Select Initialize Events Pointer to reset the internal pointer to allow
queries to start at the beginning of the stored events log.
Click Submit to update the window according to your selection.
4–20
MN-LPODR
Revision 3