LPOD-R Outdoor Amplifier / Block Up Converter (BUC)
Appendix B
Step
Task
7
Re-install the fan cover plate onto the chassis – see Figure B-8 – make
sure to keep the fan power supply wiring clear of the cover plate
surfaces. Then, re-install the four cover screws as described in Step 2.
Torque the screws to 11 ±2 inch lbs.
8
Reconnect the power source to the LPOD-R.
Figure B-3. LPOD-R PS .5 Cover Plate Screw Locations
B–3
MN-LPODR
Revision 3