Comtech EF Data LPOD-R PS .5 Installation And Operation Manual page 97

LPOD-R Outdoor Amplifier / Block Up Converter MN-LPODR
Ethernet Interface Operation Revision 3
Circuit ID
Enter a Circuit ID string of up to 48 characters. This is the identification label for
the unit.
Click Change CID to save the change.
Current Active Firmware Image # (read-only)
The selected Current Active Firmware Image is shown here. In this example,
Image 1 is the Current Active Firmware Image.
Next Reboot Image
Use the drop-down list to select the Next Reboot Image as Image 1 or 2.
Click Submit to save the change.
Perform Soft Reboot
Click Reboot Now to reboot the LPOD-R using the Current Active Firmware
Image.
Firmware Information (read-only)
This read-only window shows information about the currently loaded Bootrom.
For the complete Bulk1 and Bulk2 information, scroll through all the constituent
firmware blocks that make up the bulk.
Part Number (read-only)
This read-only window shows part number information for the unit.
4–17