LPOD-R Outdoor Amplifier / Block Up Converter (BUC)
Firmware Update
3.2.1.2 LPOD-R Connections for Earlier PS 1 or PS 1.5 Units
If you are using a user-supplied terminal emulator program – you can use a user-
fabricated 9 pin-to-19 pin adapter cable to directly connect the PC serial port to
the LPOD-R PS 1 or PS 1.5 19-pin 'J6 | COM1' port.
Figure 3-2. M&C Utilities Available from Comtech EF Data (Earlier
See Figure 3-2:
• You can use Comtech EF Data's optional CLC-10 Handheld Terminal (part
of CEFD M&C Accessory Kit KT-0020518) for serial-based monitor and
control of the LPOD-R PS 1 or PS 1.5 (when the optional EIA-232/485
serial interface is available).
This kit provides an adapter cable (CEFD P/N CA-0020526) to connect the
CLC-10 to the LPOD-R PS 1 or PS 1.5 19-pin 'J6 | COM1' port.
The CLC-10 is not supported for use with the current LPOD-R
production models.
LPOD-R PS1 or PS 1.5 Models)
3–4
MN-LPODR
Revision 3