Only); Overview - Comtech EF Data LPOD-R PS .5 Installation And Operation Manual

Chapter 5. OPTIONAL SERIAL INTERFACE
To achieve optimal performance and to access the most current remote control commands and queries, make sure to
operate the LPOD-R PS 1 or PS 1.5 SSPA/BUC with its latest available firmware.

5.1 Overview

This chapter summarizes key parameters and procedures and their associated remote commands and queries, and provides detailed
instructions for use of the optional serial remote control commands and queries interface.
Optional serial-based remote management of Comtech EF Data's LPOD-R PS 1 and PS 1.5 Outdoor Amplifiers / Block Up Converters
(SSPAs/BUCs) is available using the 'J6 | COM1' port. Original production units featured a 19-pin circular connector; current
production units feature a weatherproof RJ-45 Ethernet port.
The optional Serial Interface is not available with the LPOD-R PS .5 unit.
OPERATION (PS 1, PS 1.5 ONLY)
5–1