Table of Contents
Advertisement
LPOD-R Outdoor Amplifier / Block Up Converter
Ethernet Interface Operation
System Account Access Information
Name fields can be any alphanumeric combination with a maximum length of 10
characters.
Password fields can be any alphanumeric combination with a maximum length
of 10 characters.
• Admin, Read/Write, and Read Only Names and Passwords – The factory
defaults for these names/passwords are:
o Admin
o Read/Write
o Read Only
Click Submit Access to save any changes.
Webpage Timeout
The Webpage Timeout sets the time period that can pass before the HTTP
Interface pages time out.
• Use the drop-down list to select 5 minutes (default) or 8 hours.
• Click Submit.
The Status | Status page automatically refreshes once every ten
seconds, and resets the timeout counter.
SNTP
• Server IP Address – Specify the SNTP server IP Address.
• State - Use the drop-down list to select Enable or Disable.
Click Change SNTP Params to save these settings.
comtech/comtech
opcenter/1234
monitor/1234
4–13
MN-LPODR
Revision 3
Advertisement
Table of Contents
