Comtech EF Data LPOD-R PS .5 Installation And Operation Manual page 117

LPOD-R Outdoor Amplifier / Block Up Converter (BUC)
Optional Serial Interface Operation (PS 1, PS 1.5 ONLY)
Controller-to-Target
Instruction Code and
Parameter Type
Qualifier
(* indicates
End-of-Life)
Command Query
Statistics ESA= ESA?
Averaging
Retrieve Firmware N/A FRW?
Number
Arguments for
Command or
Response to
Query
1 byte Command or Query.
Enables or Disables averaging of statistics data, at a rate of once per second every 10 seconds, in the form x,
where:
0 = Disable (DEFAULT)
1 = Enable
NOTE: If Disabled, burst values will be logged instead of averaged values.
COMMAND EXAMPLE: <0001/ESA=0{CR}
Query only.
Returns the Boot, Bulk1, and Bulk2 firmwares loaded into the unit, each firmware load [a,b,c] is in the form FW-
AAAAAAA B.B.BB DD/MM/YY where:
FW-AAAAAAA = the firmware part number
B.B.BB = the version number
DD/MM/YY = Day/Month/Year firmware released
EXAMPLE: <0001/FRW?{CR}
>0001/FRW={CR}
Boot: {CR}
FW-0000082 0.0.1a 04/09/08{CR}
Bulk1: {CR}
FW-0000078 0.0.1a 04/09/08{CR}
FW-0000080 0.0.1a 04/09/08{CR}
FW-0000081 0.0.1a 04/09/08{CR}
Bulk2: {CR}
FW-0000078 0.0.1a 04/09/08{CR}
FW-0000080 0.0.1a 04/09/08{CR}
FW-0000081 0.0.1a 04/09/08{CR}{LF}
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
5–13
MN-LPODR
Revision 3
Target-to-Controller
(see Description of Arguments)
Response to Response to
Command Query
ESA= ESA=x
ESA?
ESA*
FRW= FRW=Boot:[a]:{
CR}Bulk1:{CR}[a
]{CR}[b]{CR}[c]{
CR}Bulk2:{CR}[a
]{CR}[b]{CR}[c]{
CR}{LF}