Installation And Operation; Mounting The Unit - Extron electronics DTP T USW 333 User Manual

Three input switcher with integrated dtp transmitter
Hide thumbs Also See for DTP T USW 333:
Table of Contents

Advertisement

Installation and
Operation
This section describes the installation and the operation of the DTP T USW 333, including:

Mounting the Unit

Mounting instructions can be found in
optional hardware is listed on the Extron website (www.extron.com).
ATTENTION:
Mounting the Unit
Connections and Reset Button
Operation
Troubleshooting — If No Image Appears
Installation and service must be performed by authorized personnel only.
L'installation et l'entretien doivent être effectués par le personnel autorisé
uniquement.
Avoid ground potential differences between the switching transmitter and receiver
installation sites, which can lead to equipment damage or a missing or unstable
picture. If a potential difference cannot be avoided, remove the ground connection
between the units and locally power both units (see
on page 32). In this configuration, the DTP T USW 333 cannot extend analog audio
and the paired receiver requires its own dedicated power supply.
Évitez les différences de potentiel de mise à la terre entre les sites d'installation
de commutation émetteur récepteur, qui pourraient endommager l'équipement
ou rendre l'image invisible ou instable. Si une différence de potentiel ne peut être
évitée, enlevez la connexion de mise à la terre entre les unités et alimentez les deux
unités localement (voir
Disconnecting the Ground
configuration, le DTP T USW 333 ne peut transmettre l'audio analogique et le
récepteur associé nécessite sa propre source d'alimentation dédiée.
Mounting the Switcher
on page 31. Compatible
Disconnecting the Ground
à la terre page 32). Dans cette
DTP T USW 333 • Installation and Operation
4

Advertisement

Table of Contents
loading

Table of Contents