Fx 3Uc Plc - Mitsubishi FX3G Series User Manual

FX /FX /FX PLC User's Manual - Positioning Control Edition
3G 3U 3UC
Common Items
2.2 FX PLC
3UC
FX Series
3UC
C
*1. The product connects with the servo amplifier via the terminal block, MIL connector (20 pins), or the
SSCNET dedicated connector.
*2. FX -20SSC-H only connects with the servo amplifier (MR-J3B) applicable to SSCNET III.
3U
*3. Up to 7 special function units/blocks can be connected to the FX
Note:
• Use the FX
3UC
the FX PLC does not have enough capacity.
3UC
• For details on the connectable special extension blocks and system configuration, refer to the following
manual.
A - 10
and show the unit positions.
B C
B
(For installation details, refer to the manuals of the special adapter and
special function units/blocks.)
C
FX -1PS-5V
3UC
C
Special function
Special function
FX -CNV-IF
2NC
-1PS-5V (extension power supply unit) only if the 5V DC power supply unit incorporated in
MIL connector (20-pin)
B
POWER
ERROR
START
DOG
PGO
X0
FX -10PG FP
2N X1 RP
f A
CLR
f B
- Terminal board (M3)
- MIL connector (20-pin)
- SSCNET dedicated
connector
block
unit
Servo motor or
Stepping motor
*1
*1
*1
-32MT-LT(-2) PLC.
3UC
→ Refer to the FX
Hardware Edition.
3UC
→ Refer to the FX
Hardware Edition.
3UC
2 Unit Connection
2.2 FX3UC PLC
*2