FX
/FX
/FX
PLC User's Manual - Positioning Control Edition
3G
3U
3UC
Built-in Positioning Functions
13. Troubleshooting
13.1
LED Indicator Lamp Check
If an error occurs, check the ON/OFF status of the LED indicator lamps on the PLC to assess the general
meaning of the error. This section does not describe all the LED indicator lamps of the main unit. For details
on the LED indicator lamps, refer to the following PLC manuals.
FX
PLC
3U
FX
-32MT-LT (-2) PLC
3UC
13.1.1 POWER Indicator Lamp (Statuses: ON, flashing, OFF) [FX
Lamp
status
The specified voltage is properly
ON
supplied to the power supply terminal.
The PLC may be at one of the following
statuses:
• The specified voltage/current is not
supplied to the power supply
Flashing
terminal.
• An external line is not properly
connected.
• The PLC has a problem.
Status of PLC
The power is being supplied properly.
• Check the power supply voltage.
• Excluding the power cable, disconnect all other cables, and
→ Refer to the FX
→ Refer to the FX
→ Refer to the FX
FX
(D, DSS) PLC
3UC
FX
PLC
3G
3G
Troubleshooting
then turn the power ON again. Check the lamp status. If the
lamp flashes again, please contact the nearest Mitsubishi
Electric distributor office .
13 Troubleshooting
13.1 LED Indicator Lamp Check
Hardware Edition.
3G
Hardware Edition.
3U
Hardware Edition.
3UC
/FX
/FX
]
3U
3UC
B - 167
A
B
Apx.