Fx 3Uc Series Main Unit (24V Dc Input - Mitsubishi FX3G Series User Manual

FX /FX /FX PLC User's Manual - Positioning Control Edition
3G 3U 3UC
Built-in Positioning Functions
2.4.2 FX Series main unit (24V DC Input)
3UC
This section describes the input specifications of the FX
turning-on rate is restricted for the input extension units and the main unit. For details on this restriction, refer
to the following manual:
Item
Input signal voltage
Input impedance
Input signal current
Input sensitivity
current
Input response time
Input signal type
Circuit insulation
Indication of input motion
*1. If inputs X000 to X007 are assigned to the zero-phase signal of the DSZR instruction or the interrupt
input of the DVIT instruction, the input response time will be as shown in the following table.
Input
X000 to X005
X006, X007
*2. PNP open collector transistors are supported only by the FX
*3. The FX
3UC
1. Internal input circuit
·
Sink input type(FX
Main unit
All inputs
X000 to X005
X006,X007
X010 to X017
X000 to X005
X006,X007
X010 to X017
X000 to X005
Input ON
X006,X007
current
X010 to X017
Input OFF
All inputs
current
All inputs
All inputs
All inputs
-
Input response time
5µs
50µs
-32MT-LT(-2) uses the display module for monitoring.
MT/D, FX
3UC- 3UC-
Class-D grounding
COM
X0
X1
Input impedance
Series main unit. Note that the simultaneous
3UC
→ Refer to the FX
24V DC input specifications
24V DC +20%, -15% / Ripple(p-p): 5 % or less
3.5 mA or more
4.5mA or more
3.5mA or more
Approx. 10 ms
No-voltage contact input
NPN open collector transistor
PNP open collector transistor
Photocoupler insulation
Turning on the input will light the LED indicator lamp
-
3UC
32MT-LT(-2))
Fuse
24V DC
2 Specifications
2.4 Input Specifications
Hardware Edition.
3UC
3.9kΩ
3.3kΩ
4.3kΩ
6mA/24V DC
7mA/24V DC
5mA/24V DC
1.5mA or less
*1
*2
MT/DSS.
A
B
Apx.
*3
B - 19