Appendix: Example Connection - Mitsubishi FX3G Series User Manual

FX /FX /FX PLC User's Manual - Positioning Control Edition
3G 3U 3UC
Example Connection
FX /FX
3G
Controllers
User's Manual [Positioning Control Edition]

Appendix: Example Connection

Foreword
To use the positioning function of the MELSEC-F FX
PLC should be connected to a servo amplifier drive unit. The Appendix, therefore, describes how to connect
the PLC to a servo amplifier drive unit and should be read and understood before attempting to install or use
the unit.
Store this manual in a safe place so that you can take it out and read it whenever necessary. Always forward
it to the end user.
This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent
licenses. Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property
rights which may occur as a result of using the contents noted in this manual.
/FX Series Programmable
3U 3UC
© 2005 MITSUBISHI ELECTRIC CORPORATION
/FX /FX Series PLC described in this manual, the
3G 3U 3UC
A
B
Apx.
Apx. - 1