Mitsubishi FX3G Series User Manual page 75

FX /FX /FX PLC User's Manual - Positioning Control Edition
3G 3U 3UC
Built-in Positioning Functions
Device number
Y000 Y001
M8347 M8357 M8367 M8377 Interrupt signal logic reverse
M8348 M8358 M8368 M8378 Positioning instruction activation
M8349 M8359 M8369 M8379 Pulse output stop command
M8460 *7 M8461 *7
M8464 *2 M8465 *2
*1. Devices related to Y003 (pulse output destination) are only valid if two FX
FX PLC.
3U
*2. Only available for FX
*3. Cleared when PLC switches from RUN to STOP.
*4. Only available for FX
*5. For the user interrupt input command, the logical NOT function will not be activated.
*6. Y002 (pulse output destination) cannot be specified when the 14-point or 24-point type FX
*7. Only available for FX
*6 *1
Y002 Y003
M8462 *7 M8463 *7
User interrupt input command
CLEAR signal device specification
M8466 *2 M8467 *2
function enable
/FX PLC Ver. 2.20 or later and FX
3U 3UC
/FX PLC Ver. 1.30 or later.
3U 3UC
and FX PLC Ver.2.20 or later.
3U 3UC
Function Attribute
*3,*5
Drivable
Read only
*3
Drivable
*3
Drivable
Drivable
*3
-2HSY-ADP adapters are connected to the
3U
PLC.
3G
4 Before Programming
4.1 List of Related Devices
Corresponding
Refer to
instructions
Subsection
DVIT
4.3.8
PLSY,PWM,PLSR,
Subsection
DSZR,DVIT,ZRN,
4.4.4
PLSV,DRVI,DRVA
PLSY,PLSR,DSZR,
Subsection
DVIT,ZRN,PLSV,
4.3.2
DRVI,DRVA
Subsection
DVIT
4.3.7
Subsection
DSZR,ZRN
4.3.4
PLC is connected.
3G
B - 37
A
B
Apx.