Mitsubishi FX3G Series User Manual page 186
Melsec-f, positioning control edition, main unit/sink output/source output, line driver output
Hide thumbs
Also See for FX3G Series:
- Programming manual (944 pages) ,
- User manual (382 pages) ,
- Installation manual (3 pages)
Table of Contents
Advertisement
FX
/FX
/FX
PLC User's Manual - Positioning Control Edition
3G
3U
3UC
Built-in Positioning Functions
4
Transfer the parameters (+ sequence program) to the PLC.
1. Select "Online" from the tool menu, and then select "Write to PLC". The "Write to PLC"
window will appear.
*1.
For Ver. 8.13P to 8.24A of GX Developer, the PLC type is FX
2. Enter a check in the "PLC parameter" check box, and then click the "Execute" button.
The selected parameter data will be transferred to the PLC. When the PLC is started (enters the RUN mode),
the transferred parameter data will be enabled. If the communication conditions set on the "PLC system(2)"
screen are changed, be sure to power the PLC OFF, and then ON again.
B - 148
*1
11 Batch Data Positioning Mode (TBL Instruction)
11.4 Positioning Parameter Setting
.
3UC
Hide quick links:
Advertisement
Table of Contents
