ZyXEL Communications NWA3560-N User Manual page 271

Table 110 CAPWAP Client Logs
LOG MESSAGE
Updated configuration
by a WLAN Controller
Success. %s
Updated configuration
by a WLAN Controller
Fail. %s
ReBoot by a WLAN
Controller. WLAN
Controller:%s
Switch Managed AP to
Standalone AP. WLAN
Controller:%s
Firmware upgraded by
WLAN Controller. WLAN
Controller:%s
Apply configuration by
a WLAN Controller
Success. %s
Managed AP
Configuration Flush.
%s
AC IP Change. New
Discovery Type:%s,
WLAN Controller IP: %s
Managed AP Receiving
Complete ZySH
Configuration from AC
Managed AP Receiving
Updat ing ZySH Configurat ion
from AC
STA Associat ion.
MAC
Addr: % 02x: % 02x: % 02x: % 0
2x: % 02x: % 02x,AP= % s
STA Disassociat ion.
MAC
Addr: % 02x: % 02x: % 02x: % 0
2x: % 02x: % 02x,AP= % s
STA Roam ing.
MAC
Addr: % 02x: % 02x: % 02x: % 0
2x: % 02x: % 02x, From = % s,
To= % s
STA List Full. STA List of
Managed AP [ % s] is Full
NWA3000-N Series User's Guide
DESCRIPTION
The configurat ion was upgraded successfully by t he WLAN Cont roller.
1st % s: Part ial Updat ing."
Configurat ion upgrade by t he WLAN Cont roller failed.
1st % s: Wrong Configurat ion."
The m anaged AP was reboot eed WLAN Cont roller.
1st % s: WLAN Cont roller I P Address."
The WLAN cont roller set t he m anaged AP t o St andalone Mode.
1st % s: WLAN Cont roller I P Address."
The CAPWAP client 's firm ware was upgraded by t he WLAN cont roller.
1st % s: WLAN Cont roller I P Address."
The WLAN cont roller successfully applied configurat ion.
1st % s: Com plet e Updat ing"
The m anaged AP reset ZySH for flushing it s running- config &
reapplied t he st art up- config.
1st % s: Reset ZySH Daem on
Changed t he m anaged AP's AC I P .
1st % s: Discovery t ype { By DHCP | Broadcast }
2nd % s: WLAN Cont roller I P Address"
The m anaged AP is receiving t ot al configurat ion from t he WLAN
Cont roller during CAPWAP prot ocol handshaking. ( Configurat ion
Change St at e)
The AP is receiving configurat ion set t ings from t he device because
t he device changed configurat ion. ( RUN St at e)
I ndicat es t he specified st at ion associat ed wit h t he specified AP .
1st % 02x~ 6t h% 02x: St at ion MAC Address.
7t h % s: AP's descript ion.
I ndicat es t he specified st at ion de- associat ed from t he specified AP .
1st % 02x~ 6t h% 02x: St at ion MAC Address.
7t h % s: AP's descript ion.
The specified st at ion roam ed from t he first specified AP t o t he ot her.
1st % 02x~ 6t h% 02x: St at ion MAC Address.
7t h % s: Source AP's descript ion.
8t h % s: Dest inat ion AP's descript ion.
The num ber of st at ions connect ing t o t he specified AP has reached it s
upper lim it .
1st % s: WTP's descript ion.
Appendix A Log Descriptions
271