set t ings if it is in st andalone m ode or t he general wireless set t ings of all of t he device's m anaged
APs if t he device is in cont roller m ode.
Figure 39 Configurat ion > Wireless > AP Managem ent ( Cont roller Mode)
The following fields display if t he Ndevice is in cont roller m ode.
Table 37 Configurat ion > Wireless > AP Managem ent ( Cont roller Mode)
LABEL
Edit
Rem ove
Reboot
#
I P Address
MAC
Model
R1 Mode / Profile
R2 Mode / Profile
Mgnt . VLAN I D
Descript ion
Figure 40 Configurat ion > Wireless > AP Managem ent ( St andalone Mode)
NWA3000-N Series User's Guide
DESCRIPTION
Select an AP and click t his but t on t o edit it s propert ies.
Select an AP and click t his but t on t o rem ove it from t he list .
Note: If in the Configuration > Wireless > Controller screen you set the
Registration Type to Always Accept, then as soon as you remove an
AP from this list it reconnects.
Select an AP and click t his but t on t o force it t o rest art .
This field is a sequent ial value, and it is not associat ed wit h any int erface.
This field displays t he I P address of t he AP .
This field displays t he MAC address of t he AP .
This field displays t he AP's hardware m odel inform at ion. I t displays " N/ A" ( not
applicable) only when t he AP disconnect s from t he device and t he inform at ion
is unavailable as a result .
This field displays t he AP or MON profile for Radio 1.
I f t he device has a second radio t his field displays t he AP or MON profile for
Radio 2.
This field displays t he I D of t he AP's m anagem ent VLAN.
This field displays t he AP's descript ion, which you can configure by select ing
t he AP and clicking t he Edit but t on.
Chapter 9 Wireless
103