Getting Started - HP 1660CS-Series User Manual

System Performance Analysis (SPA) Software

Getting started

Getting started
This section describes how to access the System Performance
Analysis (SPA) menus. Also, it describes selecting the SPA modes and
setting the specifications.
Accessing the menus
The SPA menus are accessed through the Analyzer Configuration menu.
When the configuration menu is displayed, select the Type field and choose
SPA from the pop-up.
Configuring an analyzer for SPA
Selecting State Overview, State Histogram, or Time Interval modes
To access one of the three SPA modes, select the analyzer menu field after
configuring one of the analyzers as SPA and select SPA.
Once in the SPA menu, you can move from State Overview, State Histogram,
or Time Interval Modes by selecting the Trace Mode field as shown in the
SPA menu on the next page. A pop-up menu appears, and you can select one
of the three SPA modes in the pop-up.
If you change modes while the logic analyzer is acquiring data, it will stop the
acquisition.
8-6