Rack Mount Kit; Ieee-488 Interface Cable; 5500A/Leads - Fluke 5502A Operator's Manual

5502A
Operators Manual
Model
Y5537
Y8021
Y8022
Y8023

Rack Mount Kit

The Y5537 rack mount kit supplies all the hardware necessary to install the 5502A on
slides in a 24-inch (61 cm) equipment rack. Instructions are supplied in the kit. (To rack
mount the 5725A Amplifier, order kit Y5735.)

IEEE-488 Interface Cable

Shielded IEEE-488 cables are available in three lengths (See Table 8-1). The cables
attach to the 5502A to other IEEE-488 devices. Each cable has double 24-pin connectors
at each end for stacking. Metric threaded installation screws are supplied with connectors.
Appendix D shows the pinout for the IEEE-488 connector.

5500A/LEADS

The optional test lead kit, 5500A/LEADS, is a kit of test leads for voltage and current,
thermocouple extension wires, thermocouple miniconnectors, and thermocouple
measuring "beads."
8-4
Table 8-1. Options and Accessories (cont.)
24 in. (61 cm) Rack Mount Kit for 5502A
Shielded IEEE-488 Cable 0.5 m (1.64 ft)
Shielded IEEE-488 Cable 2 m (6.56 ft)
Shielded IEEE-488 Cable 4 m (13 ft)
Description