Edge Function Specifications; Leveled Sine Wave Function Specifications - Fluke 5502A Operator's Manual

Edge Function Specifications

Edge Characteristics into 50 Ω
Range (p-p)
Resolution
Adjustment Range
Sequence
Frequency Range
Rise Time
Leading Edge Aberrations
Typical Duty Cycle

Leveled Sine Wave Function Specifications

Leveled Sine Wave
Characteristics into 50 Ω
Range (p-p)
Resolution
Adjustment Range
1-Year Absolute Uncertainty, tcal
± 5 °C
Flatness (relative to 50 kHz)
Short-term Stability
Resolution
1-Year Absolute Uncertainty, tcal
± 5 °C
2nd Harmonic
3rd and Higher Harmonics
[1] Extended frequency range to 350 MHz is provided, but flatness is not specified. Amplitude is limited to 3 V for frequencies
above 250 MHz.
Within one hour after reference amplitude setting, provided temperature varies no more than ± 5°C.
[2]
[3] At frequencies below 120 kHz, the resolution is 10 Hz. For frequencies between 120 kHz and 999.9 kHz, the resolution is
100 Hz.
±(25 ppm + 15 mHz) for frequencies of 1 MHz and below.
[4]
SC300 Oscilloscope Calibration Option Specifications
Amplitude
4.5 mV to 2.75 V
4 digits
±10 % around each sequence value (shown
below)
5 mV, 10 mV, 25 mV, 50 mV, 100 mV, 250 mV,
500 mV, 1 V, 2.5 V
Other Edge Characteristics
1 kHz to 1 MHz
< 400 ps
within 10 ns
10 to 30 ns
after 30 ns
45 % to 55 %
50 kHz Reference
Amplitude Characteristics
±(2% of output + 200 μV)
not applicable
Frequency Characteristics
10 Hz
±(25 ppm + 15 mHz)
Distortion Characteristics
SC300 Oscilloscope Calibration Option
1-Year Absolute Uncertainty, tcal ±
±(2 % of output + 200 μV)
±(25 ppm of setting + 15 mHz)
<(3% of output + 2 mV)
<(1% of output + 2 mV)
<(0.5% of output + 2 mV)
Frequency Range
50 kHz to 100 MHz
[1]
5 mV to 5.5 V
<100 mV: 3 digits
≥100 mV: 4 digits
continuously adjustable
±(3.5% of output + 300 μV)
±(1.5% of output + 100 μV)
[2]
≤ 1%
[3]
10 kHz
[4]
±25 ppm
≤-35 dBc
≤-40 dBc
5°C
[1]
100 to 300 MHz
± (4% of output + 300 μV)
± (2.0% of output +
100 μV)
10 kHz
± 25 ppm
10
10-5